« previous next »
Pages: [1]   Go Down

Author Topic: '86 K75C - Installing Engine Guards - HELP!  (Read 8908 times)

Offline 2000rsv

  • ^ Motobrick Curious
  • Posts: 95
  • Ride Far - Ride Fast
'86 K75C - Installing Engine Guards - HELP!
« on: August 13, 2012, 12:08:38 AM »
Purchased a set of K75 engine guards from another rider.  It came with brackets, hardware, and both guards.

I can't for the life of me figure out how these things go on.

Does anybody have instructions?

Thanks,  J
Logged
AMA 1097757, IBA 33089, TS 700
2009 GSA, 2012 K1600GT, 2008 KLR650, '86 BMW K75C, and always a couple of projects

Offline Scott_

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 2242
Re: '86 K75C - Installing Engine Guards - HELP!
« Reply #1 on: August 13, 2012, 06:59:53 AM »
Well there are 3 mounting points for each side.
The 2-point brackets bolt to the threaded holes in the bottom edge of the oil pan(one on each side).
There may be some rubber plugs in the holes you need to remove.
The upper part of the bracket uses another (adapter bolt) that replaces the existing engine/frame mounting bolt.

I presumed you are talking about just the "standard" guards for the front, not the extra "rear" set for the police version, as I don't have a clue how they bolt up.
Logged
  • My Garage
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
1997 K1100LT 0302488 (R.I.P.)
1997 R1100RT ZC62149(sold)
"One who does not ask questions is ashamed to learn" Danish proverb

Offline 2000rsv

  • ^ Motobrick Curious
  • Posts: 95
  • Ride Far - Ride Fast
Re: '86 K75C - Installing Engine Guards - HELP!
« Reply #2 on: August 13, 2012, 07:16:02 AM »
Scott,

Thanks for the info.  Yes, they are just the standard guards.

I will check out the mounting you described.  If it doesn't make sense, I will take some pictures so we can figure out what I am screwing up.

J
Logged
AMA 1097757, IBA 33089, TS 700
2009 GSA, 2012 K1600GT, 2008 KLR650, '86 BMW K75C, and always a couple of projects

Offline bmw-rider

  • Motobrick Curious
  • Posts: 16
Re: '86 K75C - Installing Engine Guards - HELP!
« Reply #3 on: August 13, 2012, 08:26:25 AM »
Hi J
Would this help?


grtz. Dick
Logged

Offline 2000rsv

  • ^ Motobrick Curious
  • Posts: 95
  • Ride Far - Ride Fast
Re: '86 K75C - Installing Engine Guards - HELP!
« Reply #4 on: August 13, 2012, 09:01:27 AM »
Quote from: bmw-rider on August 13, 2012, 08:26:25 AM
Hi J
Would this help?

grtz. Dick

Why yes; yes it would.

That is exactly what I was hoping to see.

Where did you find this?

Thank you.

J
Logged
AMA 1097757, IBA 33089, TS 700
2009 GSA, 2012 K1600GT, 2008 KLR650, '86 BMW K75C, and always a couple of projects

Offline bmw-rider

  • Motobrick Curious
  • Posts: 16
Re: '86 K75C - Installing Engine Guards - HELP!
« Reply #5 on: August 13, 2012, 09:12:45 AM »
Logged
Pages: [1]   Go Up
« previous next »
Tags: