WTB ABS 1 mounting brackets

[Filmcamera]

Hi

I am looking to reinstall the ABS that the PO had removed.

To do that I am looking for the mounting brackets etc to mount the modulators.

If anyone who has removed their ABS has these bits for sale that would be great.

The hoses would be a bonus if they are in good shape.

So basically looking at the attached diagram parts all of the parts on their except the actual modulator and the ABS sticker.

[Laitch]

I am looking to reinstall the ABS that the PO had removed.

If you ride steep gravel roads, ABS might be problematic. Read the text on YouTube accompanying the following video.

[K1300S]

good call putting the ABS back in.

don't (ever) use used hoses.  buy new braided or stock ones.

[Filmcamera]

You are right, I was looking at a set of braided ones - at $240 not cheap but so be it.  I just want to make sure I can get the modulators mounted properly first. 

Also the reason the PO took off the ABS was that the brain broke - I purchased a used one from a fellow motobricker. but just noticed the broken one calls itself AB02.5 whereas the replacement I brought is AB01.5 - anyone know if the two are compatible? 

BTW I try very hard to avoid steep gravel with out without ABS!

[The Mighty Gryphon]

I have most of the parts from my '92 K100RS ABS which was working when I removed it.  Brain, bracket, modulators, hard lines.  The harness is still on the bike, but I might be able to remove it if you need it. 

Make me an offer.

[Filmcamera]

The Mighty Gryphon I sent you a PM.