« previous next »
Pages: [1]   Go Down

Author Topic: blinker cancel flakey  (Read 4823 times)

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 974
  • "I'd rather be flying, but this will do nicely"
blinker cancel flakey
« on: March 19, 2017, 09:33:20 PM »
So I bought a used right handle bar switch assembly for the starter switch and the blinker cancel mechanizm only activates with a sort of twisting side press to the button... is this serviceable?  I have another unit..


 No I haven't sprayed the contacts yet but tomorrow I plan to.


thanks for any advice.
Logged
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline The Mighty Gryphon

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 6843
Re: blinker cancel flakey
« Reply #1 on: March 19, 2017, 10:20:30 PM »
Shoot some DeOxit into that puppy.  The stuff is magic.
Logged
  • In my garage in Marilla, NY
  • '91K100RS White/Blue
Current:
'91 K100RS16V "Moby Brick Too"

Past:
'94 K75RT "Ilsa, She Wolf of the SS"
'92 K100RS16V "Moby Brick" (RIP, deceased in a vehicular assault)
'94 K75S Special Edition Dakar Yellow "Cheetos"
'89 K100RS Special Edition "Special Ed"

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 974
  • "I'd rather be flying, but this will do nicely"
Re: blinker cancel flakey
« Reply #2 on: March 19, 2017, 10:24:59 PM »
Logged
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 11299
Re: blinker cancel flakey
« Reply #3 on: March 19, 2017, 11:09:51 PM »
Logged
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Offline Elipten

  • ^ SuperNatural Motobricker
  • Posts: 715
Re: blinker cancel flakey
« Reply #4 on: March 20, 2017, 10:46:10 PM »
Magic juice for k bikes.


Sent from my iPad using Tapatalk Pro
Logged
  • San Antonio, TX
  • 1990 K75RT

Offline youngbill

  • Motobrick Curious
  • Posts: 10
Re: blinker cancel flakey
« Reply #5 on: April 09, 2017, 01:06:49 AM »
I stripped the right hand assembly down and cleaned the contacts,if you do the same there are little springs and a ball bearing so do it on a clean bench and keep your eyes peeled fo said "bits".All went well,cancel and lights all working well,not too difficult really.

Sent from my HTC One A9 using Tapatalk

Logged

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 974
  • "I'd rather be flying, but this will do nicely"
Re: blinker cancel flakey
« Reply #6 on: April 09, 2017, 07:21:08 AM »
youngbil.  Check and check on springs and ball bearings.  Not yet serviced but having the papa thrill of helping my son restore his ride.  cheers. :riding:   Should be an epic day for riding in Cheeseland, the empire of cheese, the ruler of the cheese roost, Wisconsin.  Better swig some more coffee. 
Logged
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 974
  • "I'd rather be flying, but this will do nicely"
Re: blinker cancel flakey
« Reply #7 on: April 11, 2017, 08:16:34 PM »
So yesterday my Brick hit the road for the first time in 6 months after a string of challenging maintenance issues.   :clap: As for the flakey blinker cancel:


 I opted to try my in stock electrical contact cleaner before a Deoxit purchase.. with  one of those handy dandy red straws nozzles. 


Firstly we wrapped the headstock with a moving blanket to catch any over spray especially the gauges.  Then we opened the switch assembly.  Without opening up the switches ( and the resulting "sproingy" sound of tiny springs seeking a crack in the floor) I worked each control and sprayed into the openings at all sorts of angles. Reassembled, prettied up the plastic with that Back to Black plastic cleaner that seems to bring color back to any colored plastic, and tested.  Worked perfectly.


Clearly oxidization was the culprit here. Thanks all.
Logged
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 11299
Re: blinker cancel flakey
« Reply #8 on: April 11, 2017, 08:39:50 PM »
Quote from: Rcgreaves on April 11, 2017, 08:16:34 PM
Worked perfectly.
Thanks for the followup!  :clap:
Logged
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 974
  • "I'd rather be flying, but this will do nicely"
Re: blinker cancel flakey
« Reply #9 on: April 11, 2017, 09:30:06 PM »
Thanks for your interest and support!

Sent from my A573VC using Tapatalk

Logged
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"
Pages: [1]   Go Up
« previous next »
Tags: