Gear oil tool

[Texbid]

Changed my gear oil today. Made a tool based on instructions and just wanted to share the photos. The wire is standard household Romex. Long end that goes into the gearbox is 115mm long.  Works a charm

[Inge K.]

Ad 10 mm.....then you also have the low level mark, and not only the high level mark...easier to check.

[Texbid]

good idea.  Ill make anoterh one, and strip the wire so its copper for the low  level.

[richarddacat]

Factory tool kit that includes the rear shock preload wrench doubles as a gear box dip stick.
But looks like a good solution, if you're missing this tool.

[Inge K.]

Factory tool kit that includes the rear shock preload wrench doubles as a gear box dip stick.

Not on a K11 (as Texbid have)...........it's a piece of sheet metal, bent in the shape as above.

[richarddacat]

Factory tool kit that includes the rear shock preload wrench doubles as a gear box dip stick.

Not on a K11 (as Texbid have)...........it's a piece of sheet metal, bent in the shape as above.

Noted, I'll keep that in mind,

[Texbid]

Update model

[TimTyler]

Good for testing for contaminated alien blood too.