« previous next »
Pages: [1]   Go Down

Author Topic: Good or Bad Oil/Water Pump Shaft?  (Read 6035 times)

Offline Milton

  • Motobrick Curious
  • Posts: 14
  • Thick as a brick.
Good or Bad Oil/Water Pump Shaft?
« on: June 25, 2014, 09:31:27 AM »
Could someone with more experience than I with these shafts take a look at my pictures and tell me if I need the shaft replaced. To me it looks OK where the seals are bearing but I don't know for sure. From the IBMWR site (http://www.ibmwr.org/ktech/water-oil-pump-rebuild.shtml) their pictures look every bit as bad as mine but they are saying the shaft is still good  :dunno. If I can help it I would prefer not to spend $204 for a new shaft, but I would also prefer not to have to tear it apart again in a couple of thousand miles by being a cheap SOB.

Oh, and the bike is a 1996 K1100RS ~62,000 miles.

Thanks for any and all advice,

Milton S.




Rotated 180 degrees from the above photo.
Logged
1992 K100RS4v Broken but not forgotten.
1998 Triumph Tiger
1978 Honda CB400T. Project bike, as if any of them aren't.

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7652
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Good or Bad Oil/Water Pump Shaft?
« Reply #1 on: June 25, 2014, 12:23:58 PM »
greetings...

shaft photos only... no donkeys... boooo....

i aints never had mines apart so i dont know... butts good to hear from you...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline Scott_

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 2242
Re: Good or Bad Oil/Water Pump Shaft?
« Reply #2 on: June 25, 2014, 05:58:06 PM »
+1 vote to replace.
Don't think you can polish that one up enough to eliminate any risk of tearing/scaring a new seal on assembly.
Logged
  • My Garage
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
1997 K1100LT 0302488 (R.I.P.)
1997 R1100RT ZC62149(sold)
"One who does not ask questions is ashamed to learn" Danish proverb

Offline rbm

  • ^ Quintessential Motobricker
  • Posts: 2308
Re: Good or Bad Oil/Water Pump Shaft?
« Reply #3 on: June 25, 2014, 06:09:58 PM »
Wisdom has it that you can fill the voids in the shaft with Cyanoacrylate glue and make it smooth again.  Read this
Logged
  • Regards, Robert
Toronto, Ontario

1987 K75 - Build Blog @http://k75retro.blogspot.ca/

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7652
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Good or Bad Oil/Water Pump Shaft?
« Reply #4 on: June 25, 2014, 06:15:31 PM »
yawl...

wisdom has it that i aints gonna be replacing weed cookies with cyanoacrylate cookies anytime soon... i pretty sure thats what they make fruit cakes with...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline Milton

  • Motobrick Curious
  • Posts: 14
  • Thick as a brick.
Re: Good or Bad Oil/Water Pump Shaft?
« Reply #5 on: June 26, 2014, 11:50:29 PM »
Quote from: johnny on June 25, 2014, 12:23:58 PM
greetings...

shaft photos only... no donkeys... boooo....

i aints never had mines apart so i dont know... butts good to hear from you...

j o

Hiya J O,

I'm going to be riding Northern Cali and Oregon July 21 through August 1. You still buzzing around the west coast?
Logged
1992 K100RS4v Broken but not forgotten.
1998 Triumph Tiger
1978 Honda CB400T. Project bike, as if any of them aren't.

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7652
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Good or Bad Oil/Water Pump Shaft?
« Reply #6 on: June 27, 2014, 12:10:09 AM »
greetings...

we relocated to cheezconsin effective one week ago... it was a good run out there... 12 years in all... butts its time to follow my dreams and start a brand new donkey dairy here in cheezconsin... donkey milk... donkey cheeze... donkey butter... its gonna be heeeeehaaaaaaaal...

post up some photos...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline Milton

  • Motobrick Curious
  • Posts: 14
  • Thick as a brick.
Re: Good or Bad Oil/Water Pump Shaft?
« Reply #7 on: June 27, 2014, 12:18:01 AM »
Sounds yummy. I've a dog and a couple of cats you could milk too, if you need it.

You'll be missing riding Cali.

Congratulations on the move. Probably be nice to have a place you can call home again and come back to every night. Take care and ride safe.

Yeah, I'll post a ride report when I'm done.
Logged
1992 K100RS4v Broken but not forgotten.
1998 Triumph Tiger
1978 Honda CB400T. Project bike, as if any of them aren't.
Pages: [1]   Go Up
« previous next »
Tags: