how do i fit a temp gauge to k100rs

[k100]

what type of sender unit do i use our can it be uesd on the standead one aney info would be good.... 

[k100]

is there aneything speshall about the gaeg our will aney do

[rbm]

Which temperature are you trying to measure -- oil or water?

If oil, the sender replaces the oil drain plug.  Any sensor with M15 thread and can place 80ºC at midscale. The gauge should have a range 40ºC - 100ºC.   If water, the sensor connection is part of the wiring harness.

[k100]

so i should be Abel to by a generic water temp gage and connect to eggsisting  wiring ?

[rbm]

http://k100rt.aforumfree.com/t1923-installing-additional-instruments-temperature-and-fuel-gauge-work-completed

http://k100rt.aforumfree.com/t1311-installing-a-water-temperature-gauge

[k100]

 :2thumbup: thank you

[k100]

so its ok to ues standed vdo typ gauges ? yes _no our do i have to find genuwe bmw typ
 :dunno :dunno 

[mystic red]

so its ok to ues standed vdo typ gauges ? yes _no our do i have to find genuwe bmw typ
 :dunno :dunno

YES, I have one in my bike. Needs a different sending unit but I just got used to where it reads and left the OEM in.

[k100]

ok my bike is an 84 and has nun of the wiering thas showen < now what ?  :dunno2: :yikes:

[k100]

i serpous the fuel gage is out of the question now ?  and is there a vdo water temp sender that will fit ?
 :confused: