Deoxit D5 as preventive maintenance?

[foliver]

Hi!
i would like to know your opinion on the Deoxit D5 as preventive maintenance.
I'm slowly reassembly my bike, and i don't know if it's good to apply to every connection the next procedure:

1.Compressed air
2.Deoxit 5
3. 4 or 5 actuations ( plug unplug)
4. Compressed air to liberate the excess

Or i just need to do that to the ones that "i've doubt in the proper electrical transmission"...

[Laitch]

You can do n^o 2 only and have good results or compressed air and n^o 2 or connect and disconnect once with n^o 2. Just don't forget the n^o 2. 

[The Mighty Gryphon]

I usually do #2 and #3.   No need for air.  When the Deoxit "dries" it leaves a very thin film that will protect the connection. 

On the lugs that make ground connections on the frame and transmission I will polish them with very fine sandpaper or a wire brush and wipe them with a very light coat of grease on a rag to slow down corrosion.  You should not be able to see the grease on the lug and barely feel it.  That is all it takes to protect the connection.

[foliver]

I will not forget the number 2, promise, jajajajja, i'll follow the earth procedure!!

Thanks for your time, Mighty and Laitch