« on: March 28, 2020, 02:46:17 PM »
What is the travel trunk latch supposed to look like?
A previous owner had used wood screws, an aluminum block, and latch from a Samsonite suitcase. Ugly as it was, it was mainly functional, but then the JB Weld holding the aluminum spacer block came loose. Yes, I did try to re-JB-Weld it, to no avail.
I'm not really that concerned with the ability to lock it. However I'm open to suggestions for something better than the previous hack I used involving a tie-wrap (zip-tie, etc.).

Logged
- North Alabama
- 1985 K100RT very original
Ken
Current: 85 K100RT, 09 DL650, 16 4RT260, 97 XR100, 70 CT70, 06 YFM400
Past Bikes: 86 K100RT, 85 K100RS, 07 SV1000S, 80 KL250, 99 GS1100, 85 K100RT, 86 VFR700, 91 XR250, 95 VLX600, 86 TRX250, 02 GZ250, 83 Z50R, 78 ATC90, 86 XR250, 79 XR500, 72 AT1, 75 YZ360, 78 DT400, 75 DT125, 73 Trail 70