Author Topic: Negative battery wire mount  (Read 3541 times)

Offline Big_B

  • ^ Motobrick Curious
  • Posts: 76
Negative battery wire mount
« on: April 08, 2013, 04:26:18 PM »
After tearing my K1100 apart to repair the ignition switch I forget where the negative goes on the motor/chassis. It looks like it attaches to the starter, but I don't want to blow something over a simple mistake.

Does anyone know where the ground/negative wire is mounted to the motor or chassis? :dunno2:
  • North Easton, MA
  • 93 K1100RS
'93 K1100RS 75K miles all stock w/Fox aftermarket shock Corbin seat.

Offline Scott_

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 2242
Re: Negative battery wire mount
« Reply #1 on: April 08, 2013, 07:45:08 PM »
Either one of the starter mounting bolts should work just fine.
  • My Garage
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
1997 K1100LT 0302488 (R.I.P.)
1997 R1100RT ZC62149(sold)
"One who does not ask questions is ashamed to learn" Danish proverb

Offline cy7878

  • ^ Motobrick Curious
  • Posts: 102
Re: Negative battery wire mount
« Reply #2 on: April 09, 2013, 10:51:21 PM »
you can pretty much mount it anywhere.  But the actual spot is to the left side of gearbox housing, right next to the starter.  I think it's held my a 3mm hex bolt.
Chuck

San Diego
1985 K100RS

Offline Big_B

  • ^ Motobrick Curious
  • Posts: 76
Re: Negative battery wire mount
« Reply #3 on: April 09, 2013, 11:24:44 PM »
I ended up putting on the stock location right above the shit shaft. Thank you for the replies.  :2thumbup:
  • North Easton, MA
  • 93 K1100RS
'93 K1100RS 75K miles all stock w/Fox aftermarket shock Corbin seat.

Tags: