greetings motobrick curious taosbrick..
somebody needs to get a fork protection post in the lieberry...
i use the traxxion dynamics fgk1...
j o
Installed the Traxxion guards on the GS.
JO, how snug are they supposed to be ?
There is some very slight movement but I think they will stay in place OK at speed.
In dual sport mode, read bumps & thumps, undecided.
I may have to break out the Dremel wonder tool and modify the inside edge so it will slip further down. Fork brace on the GS is more robust (thicker) than on our K machines.
Only bitch would be they need to be engineered in a left/right design. The right side Allen bolt is located on the inside, hence making the tightening procedure time consuming. Doable but there is a better mousetrap.
Camera charging, I'll snap some pics this afternoon.
