Thanks, Laitch, I had not known the correct procedure for activating the fork lock. My ignition key would turn CCW, but not far. Then, the pushing in was problematic, as there was very little inward movement. So, I sprayed liberally with WD-40 and kept working the key and finally hit on the right combination of pushing the key in, moving the handlebars back from dead lock a tad and key moved to the right and the forks were locked. Problem solved--not yet. The key would turn CCW but the inner part of the cylinder would not pop out. So, more WD40, then silicone spray. Now, If I can just remember the total procedure, I have about a 20% chance of locking/unlocking the forks. BMW ingenuity continues to amaze me. I'm still dizzy-headed over the 4-pin fuel pump connector problem I recently experienced.