Author Topic: WTB: Seat for '94 K75S - non-OEM  (Read 6436 times)

Offline kmev

  • Motobrick Curious
  • Posts: 49
WTB: Seat for '94 K75S - non-OEM
« on: February 13, 2017, 10:43:31 PM »
Looking for a seat that's better than the factory plank on my K75S. I did a 700 mile day last summer on the original seat and it was painful, so I'm looking for something better for this coming summer. Must be in good shape without rips, tears, or sags, and be a color that doesn't clash with a red bike. Is is an S-bike so prefer something along the lines of a Corbin Dual Canyon Sport.
  • Madison, Wisconsin
  • 1994 K75s

Offline kmev

  • Motobrick Curious
  • Posts: 49
Re: WTB: Seat for '94 K75S - non-OEM
« Reply #1 on: February 14, 2017, 09:37:16 AM »
Do you have any more information, or pictures?
  • Madison, Wisconsin
  • 1994 K75s

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
Re: WTB: Seat for '94 K75S - non-OEM
« Reply #2 on: February 14, 2017, 10:48:36 AM »
greetings...

the fundamental transformation of the oe torture plank into the www.dawn2duskseats.com world famous dawn2dusk and into the night taintilator seat happens just an hour up the squeeky curd trail from you...

you ride that s to the motobrick garage in dodge county cheezconsin... we measure you up on the moto... take it off there and secure it to the taintilator truing table... and commence to handcrafting new seat innards using your existing seat pan and existing cover...

if you want a new cover you can ebay one of those oe spec euro covers... they fit properly and look oe... we reinstall your existing cover or your new ebay cover... your choice... its all abouts choices at the motobrick garage...

now to the matter at hand... it is what we do under the cover that secures your legacy as being one with your moto...

we use supracor stimulite honeycomb... the same material used in fighter jet seats... it costs lotts of money... butts there is no better material for a motobrick seat...

if you are physically and psychologically able to ride a motobrick from dawn to dusk... we make the seat that will enable you to do just that...

its tremendous...

more later...

j o

  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline kmev

  • Motobrick Curious
  • Posts: 49
Re: WTB: Seat for '94 K75S - non-OEM
« Reply #3 on: February 14, 2017, 10:52:41 AM »
I'm interested - what's the cost for a K75S seat?
  • Madison, Wisconsin
  • 1994 K75s

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
Re: WTB: Seat for '94 K75S - non-OEM
« Reply #4 on: February 14, 2017, 12:04:28 PM »
greetings...

ridor only... passenger only... ridor and passenger... higher... lower... same... narrowed... sculpted... widened... pitched... dished... hard... soft... medium... heat...

you see... its handmade for you... there is more to it than pinging a shipping address to paypal or ebay...

before i answer your question... please tell me what it is worth to you to ride dawn to dusk and into the night back to back to back to back to back to back to back days...

j o
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline motodude

  • ^ SuperNatural Motobricker
  • Posts: 544
Re: WTB: Seat for '94 K75S - non-OEM
« Reply #5 on: February 14, 2017, 09:14:25 PM »
This style of Corbin (https://tinyurl.com/j22gnwp), is much more comfortable on a more sport oriented bike than on a more touring oriented bike.


Tom






'95 K75RT
'90 K75RT
'87 K100RS Motorsport
No, I am not cool.  Yes, it really is the journey.

Offline wils

  • Motobrick Curious
  • Posts: 21
  • lurkin'
Re: WTB: Seat for '94 K75S - non-OEM
« Reply #6 on: February 21, 2017, 01:35:20 AM »
Haven't talked to the PO of my bike about it, but I THINK this is a K1100 seat, with the hardware/seat hinge for a K75 regular seat.

Click the thumbnails to see larger pics.
       

$175 plus shipping.
  • Seattle
  • 91K75S

Offline kmev

  • Motobrick Curious
  • Posts: 49
Re: WTB: Seat for '94 K75S - non-OEM
« Reply #7 on: February 21, 2017, 09:34:47 AM »
I'm going to have Johnny turn my current seat into one of his Dawn 2 Dusk seats.
  • Madison, Wisconsin
  • 1994 K75s

Offline wils

  • Motobrick Curious
  • Posts: 21
  • lurkin'
Re: WTB: Seat for '94 K75S - non-OEM
« Reply #8 on: February 21, 2017, 11:34:27 AM »
Curious about those seats myself, but I can't get the site to render in any web browser.


Johnny, do you have pics of one of those saddles?
  • Seattle
  • 91K75S

Tags: