« previous next »
Pages: [1]   Go Down

Author Topic: Custom seat questions  (Read 4259 times)

Offline nods

  • Sydney, Australia
  • Motobrick Curious
  • Posts: 42
  • 1985 K100 RT
Custom seat questions
« on: January 23, 2017, 04:47:44 PM »
Hi Gurus,


I'm trying to understand how a custom seat is made, and not getting far with you tube videos as the are mostly about fibreglass cafe seats which is not what I'm after.


I want a nice simple flat seat that will fit to my frame (after it's been modified).


The example seat in the picture which I found on this forum http://www.motobrick.com/index.php/topic,8689.msg67484.html#msg67484 looks like what I need in terms of the base.  I think the foam layers and sculpting looks pretty straight forward, then I pay a professional to upholster.  In the example pic, how has this seat been upholstered under the aluminium base, and then how has the seat been affixed to the base?


The other thing I'm not sure about is how the seat will sit on the frame.  Is the idea for the perimeter of the seat to rest on the frame, or will this rub through the upholstery over time?


Cheers for any advice.


Nods


Logged
  • Sydney Australia
  • 1985 K100 RT

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 11299
Re: Custom seat questions
« Reply #1 on: January 23, 2017, 06:01:58 PM »
Quote from: nods on January 23, 2017, 04:47:44 PM
  In the example pic, how has this seat been upholstered under the aluminium base, and then how has the seat been affixed to the base?
The other thing I'm not sure about is how the seat will sit on the frame.  Is the idea for the perimeter of the seat to rest on the frame, or will this rub through the upholstery over time?
Cheers for any advice.
My advice is to pm klhoskins through the site using his profile on the post to which you linked and ask him how the seat was constructed. Insofar as how it is mounted, the link you supplied has text that advises a plate needs to be welded to the frame for a seat mount.
Logged
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Offline nods

  • Sydney, Australia
  • Motobrick Curious
  • Posts: 42
  • 1985 K100 RT
Re: Custom seat questions
« Reply #2 on: January 23, 2017, 06:34:02 PM »
Cool, will do Laitch.  He hasn't been on for a few months but I'll give him a go.
Logged
  • Sydney Australia
  • 1985 K100 RT

Offline The Dude

  • ^ SuperNatural Motobricker
  • Posts: 509
Re: Custom seat questions
« Reply #3 on: January 23, 2017, 08:41:18 PM »
Nods,I fabricated a pan with sides.It worked for me.The sides cover the frame tubes and the seat edge can be well defined.The material cover goes over the sides round the edge and up out of sight,with a large gluing surface.
Logged
  • Auckland, New Zealand
  • K75s
Current.
TR6R 1973 from new.
Moto guzzi 850 III .1983 from,almost, new.
K75S 1986 from new.vin-0103141
On my second millionth km.give or take a hundred k Kay's.
"The Dude abides. I don't know about you but I take comfort in that. It's good knowin' he's out there."
All the best!

Offline nods

  • Sydney, Australia
  • Motobrick Curious
  • Posts: 42
  • 1985 K100 RT
Re: Custom seat questions
« Reply #4 on: January 23, 2017, 09:31:13 PM »
Quote from: The Dude on January 23, 2017, 08:41:18 PM
Nods,I fabricated a pan with sides.It worked for me.The sides cover the frame tubes and the seat edge can be well defined.The material cover goes over the sides round the edge and up out of sight,with a large gluing surface.
Ahhh thanks Dude - so the upholster can glue the fabric to the underside of the seat tray. That's another question answered.  [emoji106]
Logged
  • Sydney Australia
  • 1985 K100 RT
Pages: [1]   Go Up
« previous next »
Tags: