Author Topic: FS - Selling some parts on eBay...Harness and Case Holders  (Read 2155 times)

Offline escodsm

  • Motobrick Curious
  • Posts: 13
FS - Selling some parts on eBay...Harness and Case Holders
« on: April 25, 2016, 10:51:42 PM »
Hey brickers, I'm selling some parts over on eBAY

1987 K75 Wiring Harness - with fuse box, mostly complete, pics are here, bidding starts at $1.25
http://www.ebay.com/itm/231924717198?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Same bike, the left and right side case holders, great shape, no hardware...$2.50
http://www.ebay.com/itm/231924720656?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Just dropping by to let everyone know.  Good parts if you can use em. 
The harness was the old one I wrote about in this and other forums, it had the factory alarm and auxiliary lighting...some of these were cut when I got the bike.
I don't know if this would have been the culprit for my no-start, since I replaced the coolant temp wires (rodents) and then realized my kill switch contact plate was missing (so i rewired it as always on)....

The holders are in great shape
any questions just ask...
the K-cafe is almost ready, just need lighting and dash installed, new brakes, a shorty muff and a once over.....

thanks for your time

escodsm
  • Providence, RI
  • 1987 K75 Projekt nackte Straßenmotorrad

Tags: