« previous next »
Pages: [1]   Go Down

Author Topic: Magnecor wire set too short?  (Read 4752 times)

Offline jakgieger

  • itinerant farmer
  • ^ SuperNatural Motobricker
  • Posts: 618
Magnecor wire set too short?
« on: January 08, 2016, 04:53:21 PM »
So, I got my magnecor wire set today 8.5mm, and the #1 wire is 3/4 inch short.  Yes... :bmwsmile I have the right wire because #1 wire is the longest.  Any thoughts?  I am matching it to my factory BMW set...
Logged
  • Kansas USA
  • 1989 K100rs se
"What we've got here is failure, to communicate.  Some men, you just cain't reach.  So you get what we had here last week.  Which is the way he wants it...Well, he gets it.  I don't like it any more than you men do."

Offline Martin

  • ^ Quintessential Motobricker
  • Posts: 4475
Re: Magnecor wire set too short?
« Reply #1 on: January 08, 2016, 05:15:12 PM »
Get back onto your supplier and send him a picture of the wires side by side, explain that one wire is to short as per the picture. Quote the lengths of the new and old wires. If he is reputable he will fix the problem, it could be a genuine mistake.
Regards Martin
Logged
  • North Lakes Queensland Australia
  • 1992 K75s Hybrid, Lefaux, Vespa V twin.

Offline jakgieger

  • itinerant farmer
  • ^ SuperNatural Motobricker
  • Posts: 618
Re: Magnecor wire set too short?
« Reply #2 on: January 08, 2016, 05:22:43 PM »
Yes Martin, I called Magnecor.  He said send it back and he would replace it.  I am going to send him my original BMW set.  Perhaps his spec is wrong or someone made a mistake.  I was just wondering if anyone else had this issue with a Magnecor 8.5mm set.
Logged
  • Kansas USA
  • 1989 K100rs se
"What we've got here is failure, to communicate.  Some men, you just cain't reach.  So you get what we had here last week.  Which is the way he wants it...Well, he gets it.  I don't like it any more than you men do."

Offline TimTyler

  • Adrninistrator
  • ^ Quintessential Motobricker
  • Posts: 1884
Re: Magnecor wire set too short?
« Reply #3 on: January 08, 2016, 07:08:22 PM »
My K75  set from Magnecor fits.
Logged

Offline Scott_

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 2242
Re: Magnecor wire set too short?
« Reply #4 on: January 08, 2016, 08:40:27 PM »
on my 4cyl K motor my #2 plug was the longest.
Logged
  • My Garage
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
1997 K1100LT 0302488 (R.I.P.)
1997 R1100RT ZC62149(sold)
"One who does not ask questions is ashamed to learn" Danish proverb

Offline jakgieger

  • itinerant farmer
  • ^ SuperNatural Motobricker
  • Posts: 618
Re: Magnecor wire set too short?
« Reply #5 on: January 08, 2016, 11:00:45 PM »
I will check it out tomorrow Scott...to late tonight.  I very carefully removed and marked the wires (I think :dunno2:).  My bike still had the factory wire set, so I will recheck the lengths tomorrow.  BTW the motor was running fine
Logged
  • Kansas USA
  • 1989 K100rs se
"What we've got here is failure, to communicate.  Some men, you just cain't reach.  So you get what we had here last week.  Which is the way he wants it...Well, he gets it.  I don't like it any more than you men do."

Offline Scott_

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 2242
Re: Magnecor wire set too short?
« Reply #6 on: January 09, 2016, 09:38:06 AM »
Here's a pic of mine with the stock set. Notice how #2 and #4 loop around the plugs #1 and #3 respectively.
Logged
  • My Garage
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
1997 K1100LT 0302488 (R.I.P.)
1997 R1100RT ZC62149(sold)
"One who does not ask questions is ashamed to learn" Danish proverb

Offline jakgieger

  • itinerant farmer
  • ^ SuperNatural Motobricker
  • Posts: 618
Re: Magnecor wire set too short?
« Reply #7 on: January 09, 2016, 05:22:56 PM »
So I checked and re-chechecked.  On my bike, the factory set, has #1,2,&3 as straight shots, with 4 as a loop.  The #1 Magnecor is still the longest and too short...
Logged
  • Kansas USA
  • 1989 K100rs se
"What we've got here is failure, to communicate.  Some men, you just cain't reach.  So you get what we had here last week.  Which is the way he wants it...Well, he gets it.  I don't like it any more than you men do."

Offline Martin

  • ^ Quintessential Motobricker
  • Posts: 4475
Re: Magnecor wire set too short?
« Reply #8 on: January 09, 2016, 05:33:38 PM »
So it looks like they sent the wrong set, at least you know your not going mad.
Regards Martin
Logged
  • North Lakes Queensland Australia
  • 1992 K75s Hybrid, Lefaux, Vespa V twin.

Offline jakgieger

  • itinerant farmer
  • ^ SuperNatural Motobricker
  • Posts: 618
Re: Magnecor wire set too short?
« Reply #9 on: January 09, 2016, 06:47:37 PM »
Oh, I'm quite mad :clap: not necessarily the wire set though :bmwsmile
Logged
  • Kansas USA
  • 1989 K100rs se
"What we've got here is failure, to communicate.  Some men, you just cain't reach.  So you get what we had here last week.  Which is the way he wants it...Well, he gets it.  I don't like it any more than you men do."
Pages: [1]   Go Up
« previous next »
Tags: