« previous next »
Pages: [1] 2   Go Down

Author Topic: FS: K75 Parts  (Read 27486 times)

Offline pallum

  • ^ Proficient Motobricker
  • Posts: 192
FS: K75 Parts
« on: June 06, 2015, 02:36:54 PM »
So I have decided to retire my original motobrick. 1986 K75C with 140k on the clock. Worn valves are bleeding oil into the engine and I think this brick as a whole is at the end of its life. Prices will be lower than whatever I look up on ebay-- just for you fellow brickers! Free delivery to the western half of Washington state, anything else I'll ship by post office flat rate and we'll talk numbers before anything goes through. Paypal for the transfer of monies. I've been having electrical issues so anything electrical you want won't be much more than the shipping, just in case. I've been screwed on bikes before, so anything that isn't up to OEM standard won't be for sale (like the frame that I straightened myself). Just lookin' to help some brickers out before I call up the scrap man.

I transferred all the body work to my new ride, so the full get-up for a 1994 K75 Standard in bright blue just like the Brick of the Corn is available. PM me and we'll talk pictures.

Basically here is a list of things that are already sold/not for sale and if there's anything else you're looking for just shoot me a PM:

Saddle bags
Final Drive
Rear wheel
Right peg plate
Frame (bent)
Handlebars (bent)
Battery covers
Right rear turn signal
Ignition Control Unit
Hall Effect Sensor
Low Seat and hardware
Rear shock
Throttle Perch
Front Brake Master Cylinder
Logged
  • Federal Way, WA
1994 K75RT 45,000 miles (Apr 2020)

Offline Bokobob

  • ^ Proficient Motobricker
  • Posts: 287
  • I am a 1936 Model
Re: K75 Parts for Sale
« Reply #1 on: June 06, 2015, 06:09:39 PM »
I have a 1987 K75C.  Need both right and left side battery covers if functional...Cosmetic condition is not very important to me.
Thanks
Oh, and I will also shoot you a pm.

Logged
  • Gastonia, NC
Grace + Peace,
Bob
1995 BMW K75
2104 Honda CB1100 Standard 4 cyl
1994 Honda Magna 750 V4
1996 Kawasaki Vulcan 500

NewBrick

  • Guest
Re: K75 Parts for Sale
« Reply #2 on: June 09, 2015, 11:07:45 PM »
Evening,

I was wondering what Gen and type are the saddle bags

Thanks!
Logged

Offline Bokobob

  • ^ Proficient Motobricker
  • Posts: 287
  • I am a 1936 Model
Re: K75 Parts for Sale
« Reply #3 on: June 10, 2015, 04:58:56 AM »
As far as I know, the bags are OEM and the bike is an 87 K75C...that is all I know.
Logged
  • Gastonia, NC
Grace + Peace,
Bob
1995 BMW K75
2104 Honda CB1100 Standard 4 cyl
1994 Honda Magna 750 V4
1996 Kawasaki Vulcan 500

Offline pallum

  • ^ Proficient Motobricker
  • Posts: 192
Re: K75 Parts for Sale
« Reply #4 on: June 11, 2015, 12:42:36 AM »
Bags are OEM, but also still mine as my new whip didn't come with any. (You wouldn't want them with they way they're beat up anyways)
Logged
  • Federal Way, WA
1994 K75RT 45,000 miles (Apr 2020)

Offline MonkeyMcBean

  • ^ Proficient Motobricker
  • Posts: 137
Re: FS: K75 Parts
« Reply #5 on: June 12, 2015, 11:04:41 PM »
Selling your bars? I'd like to try the C bars on my S.
Logged
  • North Dakota, USA
  • 1993 k75s
This is it. F*** it. It is what it is.

Offline mufflerbearings

  • Curious
  • Posts: 8
Re: FS: K75 Parts
« Reply #6 on: June 12, 2015, 11:36:03 PM »
I have a 1987 K75 that recently started displaying intermittent symptoms of a possibly bad Hall Effect Sensor.  My (admittedly shoddy and amateur) diagnostics have been inconclusive.  I am therefore not excited about shelling out $400 for a new HES from euromotoelectrics only to find that it wasn't the problem.  Do you have an HES that you're willing to sell cheap?   :bmwsmile
Logged
  • Cathedral City, CA
  • 1987 K75

Offline Bokobob

  • ^ Proficient Motobricker
  • Posts: 287
  • I am a 1936 Model
Re: FS: K75 Parts
« Reply #7 on: June 13, 2015, 06:04:06 AM »
Monkey and Muffler..................
Thanks for inquiries...not selling the handlebars and have no knowledge of the other part...
Wish I could help...

Logged
  • Gastonia, NC
Grace + Peace,
Bob
1995 BMW K75
2104 Honda CB1100 Standard 4 cyl
1994 Honda Magna 750 V4
1996 Kawasaki Vulcan 500

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
Re: FS: K75 Parts
« Reply #8 on: June 13, 2015, 08:00:56 AM »
i will take the valve shims if you still gotts them... if you accept paypal and will mail them to tim tiorler for me...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline pallum

  • ^ Proficient Motobricker
  • Posts: 192
Re: FS: K75 Parts
« Reply #9 on: June 13, 2015, 02:01:17 PM »
I have LT bars on this thing anyways, and they have a nice tweak in them (took a while to get used to that one).
Logged
  • Federal Way, WA
1994 K75RT 45,000 miles (Apr 2020)

Offline pallum

  • ^ Proficient Motobricker
  • Posts: 192
Re: FS: K75 Parts
« Reply #10 on: June 13, 2015, 02:03:45 PM »
Quote from: johnny on June 13, 2015, 08:00:56 AM
i will take the valve shims if you still gotts them... if you accept paypal and will mail them to tim tiorler for me...

j o

I got a whole bag of them JO, if TimTiorler will be around this weekend I'll make a run down to Olympia to deliver.
Logged
  • Federal Way, WA
1994 K75RT 45,000 miles (Apr 2020)

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
Re: FS: K75 Parts
« Reply #11 on: June 13, 2015, 03:00:25 PM »
i just wanted the 3 used exhaust shims... he aints around... he is chooting a world famous musician doing a small venue concert... hope he getts a t-shirt...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline pallum

  • ^ Proficient Motobricker
  • Posts: 192
Re: FS: K75 Parts
« Reply #12 on: June 13, 2015, 09:11:54 PM »
You looking for any thickness specifically? Or just really want me to pull out the ones in there already...
Logged
  • Federal Way, WA
1994 K75RT 45,000 miles (Apr 2020)

Offline MonkeyMcBean

  • ^ Proficient Motobricker
  • Posts: 137
Re: FS: K75 Parts
« Reply #13 on: June 15, 2015, 10:07:38 PM »
Right rear turn signal?
Logged
  • North Dakota, USA
  • 1993 k75s
This is it. F*** it. It is what it is.

rogan

  • Guest
Re: FS: K75 Parts
« Reply #14 on: June 18, 2015, 07:38:04 PM »
I have a 1985 K100RS and need a few small parts that I think were the same:

Fuse box cover and gasket
Lid for underseat tool tray/brain box
Cover that screws (one screw) into back of instrument cluster and covers the two multipin plug connectors that plug in there

Have any of these you want to part with?  Thanks.
Logged

Offline MonkeyMcBean

  • ^ Proficient Motobricker
  • Posts: 137
Re: FS: K75 Parts
« Reply #15 on: June 18, 2015, 10:21:24 PM »
Does the 75c have the same tank as the 75s?
Logged
  • North Dakota, USA
  • 1993 k75s
This is it. F*** it. It is what it is.

Offline pallum

  • ^ Proficient Motobricker
  • Posts: 192
Re: FS: K75 Parts
« Reply #16 on: June 22, 2015, 02:25:38 PM »
The tank is from a 1994 K75RT. Somewhere down the line the tank structure changed to where the posts at the front of the frame with the round bumpers on them were twice as wide. If both of those posts are approximately 2 inches long then the 94 tank I have will fit. I can take a picture when I get back home on Thursday.
Logged
  • Federal Way, WA
1994 K75RT 45,000 miles (Apr 2020)

Offline mufflerbearings

  • Curious
  • Posts: 8
Re: FS: K75 Parts
« Reply #17 on: July 06, 2015, 11:19:55 PM »
Pallum, the Hall Effect Sensor showed up in today's mail.  I slapped it in and took some hot laps around the barrio.  It seems to have solved the problem!   :2thumbup:  I just wanted to thank you and give the thread a bump.
Logged
  • Cathedral City, CA
  • 1987 K75

Offline pallum

  • ^ Proficient Motobricker
  • Posts: 192
Re: FS: K75 Parts
« Reply #18 on: July 11, 2015, 05:25:48 AM »
Glad to help, mufflerbearings!

Monkey: I had forgotten to upload the tank mount picture until now, this is the "older" style of mount. The tank for sale only fits frames with the extended bumpers which are twice as wide as the ones shown in the picture:


Logged
  • Federal Way, WA
1994 K75RT 45,000 miles (Apr 2020)

Offline MonkeyMcBean

  • ^ Proficient Motobricker
  • Posts: 137
Re: FS: K75 Parts
« Reply #19 on: July 13, 2015, 10:54:00 AM »
Thanks, I'll take another look at mine.
Logged
  • North Dakota, USA
  • 1993 k75s
This is it. F*** it. It is what it is.

Offline MonkeyMcBean

  • ^ Proficient Motobricker
  • Posts: 137
Re: FS: K75 Parts
« Reply #20 on: July 13, 2015, 02:29:29 PM »
Meanwhile, do you have some bushings you can sell me. they hold the box above the battery below the seat.



Logged
  • North Dakota, USA
  • 1993 k75s
This is it. F*** it. It is what it is.

Offline beemuker

  • ^ Quintessential Motobricker
  • Posts: 1119
Re: FS: K75 Parts
« Reply #21 on: July 18, 2015, 12:20:15 PM »
I need a dashpad. one of the mounts is missing on mine.
Logged
  • Panama City, FL
  • '00 R1100RT,’92 K75 RT,past tense:'83 R80ST, '93 K1100LT,,94 R1100RS K75s, Honda NC700, Suzuki Bandit 1200, bmw R75/5 Honda 750

Offline jfox855

  • Curious
  • Posts: 4
Re: FS: K75 Parts
« Reply #22 on: July 22, 2015, 12:20:25 AM »
Hi, I'm looking for engine crash bars for a 95 K75. Really only need a black  right one but would take both. I believe there all the same for all models except the RT .Thanks, Jeff
Logged

fuzerator

  • Guest
Re: FS: K75 Parts
« Reply #23 on: July 25, 2015, 02:51:01 AM »
I just got my 1993 K75 standard running again after 6 years. Yay! But now have the infamous left side tank leak. So am out of commission again after only 50 miles. Booh!
Any chance your tank is still available? I really want to be on the road this summer! Thanks.
Logged

Offline MonkeyMcBean

  • ^ Proficient Motobricker
  • Posts: 137
Re: FS: K75 Parts
« Reply #24 on: July 25, 2015, 09:29:15 AM »
As a temporary fix, you can get some fuel tank repair epoxy. Is designed to be safe for use in gas tanks. So it wont dissolve or break down.
Logged
  • North Dakota, USA
  • 1993 k75s
This is it. F*** it. It is what it is.
Pages: [1] 2   Go Up
« previous next »
Tags: