Author Topic: New guy from Chicago  (Read 6585 times)

Octarine

  • Guest
New guy from Chicago
« on: April 05, 2013, 04:08:08 PM »
Hi, my name is Mike and I am the proud new owner of a 1985 k100. Looks like it is the 73rd k100 made for the US with a 7/84 frame date.

It's decently maintained but the po just had the clocks rebuilt by a guy in Texas less than a month ago and the speedo doesnt work and the tach jumps around like a hamster on crack.
U
Im at work now but will post pics later. Got to change the brake fluid stat!

Offline detbmw

  • ^ Proficient Motobricker
  • Posts: 249
Re: New guy from Chicago
« Reply #1 on: April 05, 2013, 04:47:22 PM »
My speedometer was broken when I bought my K75S. I sent it to Overseas Speedometer in Austin, TX. They did a great job. http://www.speedometer.com/
  • Nacogdoches, Texas
  • 1988 Red K75S (der rotem Backstein) plus one that isn't a brick
Rich
East Texas BMW+ Motorcycle Club
Texas National Picnic, Jacksonville TX, 3rd Saturday in May

Offline cmichael

  • ^ Motobrick Curious
  • Posts: 60
Re: New guy from Chicago
« Reply #2 on: April 05, 2013, 05:41:12 PM »
Welcome!

I'm in the area too. 

As for the speedo, gears can be had for around 50 dollars.
1995 K75

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
Re: New guy from Chicago
« Reply #3 on: April 05, 2013, 06:41:56 PM »
greetings octarine...

welcome to the motobricl.com...

im gonna have to organize a midwest motobrick motodebauchery this july...

j o
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Octarine

  • Guest
Re: New guy from Chicago
« Reply #4 on: April 05, 2013, 10:39:57 PM »
Its good to see more Chicagoans here! I probably ran into you at Mods and Rockers as I looked wistfully on the German bike section:)

The speedo was rebuilt by Automatic in late Feb. $325 and it does not work. Im going to run down the sensors and all the connections to see if the fault lies there. I dont think that would cause the tach needle to jump so much, right?

I rode it for a few minutes without a helmet (eek) and I hear a bit of a tap, going to check the valves, I come from Suzuki GS bikes so valve checks are routine  for me.

Offline Tio Jaimito

  • Proficient Motorcycling afficionado!
  • ^ Motobrick Curious
  • Posts: 106
  • in the end, Ur only left with what you've given.
Re: New guy from Chicago
« Reply #5 on: April 06, 2013, 12:22:31 AM »
Welcome and great to have another Chicagoland K100 on board.    We are working on getting some of the local ancient Ks  to ride together sometimes (to counter R-mania).  I have offered occasional  Sundays in Kenosha for late lunch at the Kenosha YC for a starting point. We are open to other ideas.      Racin Rick is another motobricker K1100 who lives in the area.  I have a 1985  K100Rs and my wife has a 1987 K75s.   Looking forward to your photos.  See you here and on the road.  Good luck with your new (old) K.
UJ
1985 k100RS Alaskablau  18,100 miles  and K75S ColombiaGray 9400 miles
History:   '76 wing, '75 F550, '79 XS650, '76 CB360.

Octarine

  • Guest
Re: New guy from Chicago
« Reply #6 on: April 06, 2013, 12:50:06 AM »
Thanks Jaimito. Full moon I may hit up this Sunday morning. I work retail (Lowe's) so I don't get a lot of weekends off. I do try to make it to Kenosha as my mom and my sister both live there.

Offline branandfox

  • ^ Proficient Motobricker
  • Posts: 179
  • Loraine. K1050RS
Re: New guy from Chicago
« Reply #7 on: April 06, 2013, 02:08:03 PM »
Welcome!
Hit the throttle and live.
Don't blink.
Don't slow.
Just breathe.

Offline racinrich

  • ^ Proficient Motobricker
  • Posts: 296
Re: New guy from Chicago
« Reply #8 on: April 09, 2013, 10:05:06 PM »
welcome :mm
1993 k1100 lt silk blue
des plaines ill
USA

Tags: