All 4 turn signals stopped working.

[doctorchad]

Hello, everyone.  I purchased a K75s on Craigslist and took it in to a mechanic to have all of the base line mechanicals done.  I have had it a week now and I am in love with it.  However, last night all 4 turn signals quit, and I noticed when I push the signal buttons, my clock goes dim...
 
I know, spooky. When I cancel the turn signals, the clock comes back on.  I have not found any fuse issues, and I have no idea where else to look. 

Any thoughts would be appreciated.

Chad

[frankenduck]

http://www.motobrick.com/index.php/topic,1100.0.html

[Inge K.]

I would guess bad connection at fuse #3, check voltage drop at fuse when turning on flasher.

Inge K.

[doctorchad]

Rechecked all fuses, no luck.  Went to Autozone and bought all new replacements.

Works great now.  Put the old fuse back in, and that one worked also.  I will play with the connections this weekend.

Thanks!

[TimTyler]

Have a look at this: http://www.ibmwr.org/ktech/electrical-tuneup/index.shtml

[wmax351]

I had a similar problem. Blew the horn/fan fuse with my fan and stebel running at the same time. Then my turn signals started acting wonky. Replaced the fuse, good to go.

[frankenduck]

The flasher relay has two fused power supplies. Fuse 3 which is unswitched. (To run the hazards with the bike turned off.) Fuse 7(switched) for the turn signals.