Author Topic: WTB: k75 lower belly pan/cowl mounting hardware  (Read 5177 times)

Offline JackStraw587

  • Curious
  • Posts: 2
WTB: k75 lower belly pan/cowl mounting hardware
« on: January 24, 2025, 05:38:05 PM »
Hello all, hope life is treating you all well.  Anybody cafe there "s" out and have the mounting hardware laying around? Just thought I'd see...
  • Columbus
  • 1992 K75RT

Offline sooprvylyn

  • ^ Proficient Motobricker
  • Posts: 305
  • How else can I customize this thing?
Re: WTB: k75 lower belly pan/cowl mounting hardware
« Reply #1 on: January 28, 2025, 03:59:00 PM »
https://www.ebay.com/itm/387508636930?_skw=k75+engine+spoiler+mount&itmmeta=01JJQ92R6A1C239NJD13ZWYYTV&hash=item5a39508d02:g:zsQAAOSwq71nExdF&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJKlsVD2LU3ejYONTns7snK5yP2zXBLg0NV2jdUr0RKHdGHPtbpeVJe9CKEUxXOh9PAdnIPcrrNCFMj36HcazU4xBGyXfeJ9WL6mP4%2B4UaUqyx40JRWnUPEs3i9zFjOlJl%2FSrmBg0RTw8075tyKJIPQqkZ0vt3vpom62KRefO5%2FRi01rsuDGywtA05CFYA6BYfOSfphYvEzwApbIFwymL5bZvWmgxUcpYOhPaznngEHy%2BiwkCURYJ4DZMGzb8%2FVUOJxg%3D%7Ctkp%3ABk9SR76Di-mVZQ


This is the only thing you REALLY need that is BMW proprietary(part 20 on the image below)...and your belly pan needs to have the matching rectangular grommet and bracket(parts 5 and 7).  For the rest, I just used 1 long bolt with a fender washer and a rubber washer to attach mine to my k75 and rode it without any issues for a couple years (you dont really need parts 6, 8, 9 , 10 ,11).
  • Austin TX
  • '93 k1100rs last 7 of vin-6495569
Basic bitches ride Rs



Tags: