There's enough here to make a 100% functional top case, with a little work. This was mounted on my GS when I got it, using some homemade brackets. The lid has been painted a color very close to Marrakesh red, and the mounting plate has a few extra holes from the GS mounting. All still fully functional.
The hinge plate is breaking out of the lower box half at a couple rivets, and the lock cylinder is removed from the latch (but is included). The latch works fine without the lock cylinder... you could leave it out, reinstall it with no plates, or play around with filing or replacing the plates to key it to your bike's ignition.
How about $40 plus shipping?
Thanks,
Andy
