Location of fuel injection relay?

[Quiltzig]

Thanks for all the suggestions guys. So yes, I do get voltage for a second or two on the 4 pin socket green wire when starter is pressed. Tried applying voltage to the tank side of the 4 pin connector, and the pump does not run (it did run a couple of weeks ago when I did this) - so it looks like I will be taking the pump out again or else there is a problem in that connector. Might take me a while to get back to this as I just got my Rally Raid kits for the G310GS bikes & need to fit those for a ride in a few weeks.

[natalena]

If the pump was working before, I would check the wire runs themselves first, along with the connectors. Ground faults and intermittent shorts are real boogers to hunt down. Good luck.

[Quiltzig]

By the way, what is the cylindrical thing between the air filter and the crank cover?

The cylinder is a custom made radiator overflow tank.

[rbm]

There has been a spate of fuel sender failures documented this year.  Hope it's not that.  Probably a bad 4-pin connector.

[johnny]

greetings...

motobrick.com is going to be banned in new zeeland... you gonna have to getts the signal from tasmania...

good luck...

j o