Wiring running lights

[woodgeek]

I purchased dual filament turn signals to install on my K100. I had the intention of wiring them up so that they would function as running lights and turn signals. Looking at my K100RT signals, they only have two terminals so I don’t think they functioned as running lights from the factory. Can anyone advise me how to wire up my signals? Thanks in advance.

[Laitch]

http://www.ibmwr.org/ktech/runlite.shtml

Thanks in advance not accepted.

[Scott_]

Bear in mind.... these were not originally wired for dual element lamps for a reason. HEAT.  I'd consider LED running lights(or combination LED lamps) if you want to go that route, else be prepared for misshapen plastic lenses from the heat of standard lamps.

[The Mighty Gryphon]

My K75RT has dual filament bulbs in the turn signals front and back and after 30,000 miles they still haven't melted.

[johnny]

gotts the rears on all my motos... http://www.run-n-lites.com/AppGuide-Run-n-lites.html

have had these... 100% plugg n playy... https://kisantech.com/mag/signalminder/sm-5.html

[woodgeek]

Thanks guys!

[Scott_]

More for you to ponder, before you get a ticket(or a warning at the least), or a failed inspection.......
Any rear facing running light cannot be any color other than RED.

I have RED led's mounted in my rear signal housings. They glow red(even behind the orange lens) when on and the amber turn lighting is visible when activated.

I used these:
http://www.run-n-lites.com/AppGuide-LiteBuddys.html
http://www.run-n-lites.com/images/52001.jpg

I also have 1 of these LightBlazer's on one of my bikes:
http://www.run-n-lites.com/images/56011.jpg

[woodgeek]

Has anyone used the front “parking lamp bulb” wiring to hook up running lights?

I removed my fairing and noticed that bulb on my wiring harness.

I like the Run-n-lites but I also like the idea of using an existing feature that’s part of the existing wiring harness.

[The Mighty Gryphon]

The parking lamp bulb is where mine are connected.

[woodgeek]

The parking lamp bulb is where mine are connected.

Thanks Jim [emoji106]