Custom triple clamps

[Roland]

Anyone looking for a custom cafe triple clamp for a bmw k100. mine is a 1985 k100 rt. I need to make a batch to cover the overhead. I can put pictures of design if there is interest. thank you

[Arktasian]

Sure, let's see what you're creating.

[Roland]

It is a work in progress and still in prototyping phase. I can basically change anything except for the position of the three holes. Please give me any ideas on what i should change to make it better/ more appealing.

[The Dude]

Roland,you've put the clamp pinch bolts on the outside,makes it look like the ears of a tiki from the South Pacific.
A couple of flared nostrils just above the mouth would finish it off for me. :riding:


Seriously,I would reconsider the pinch bolt position.They can be inside and almost no influence on the aesthetic.i.e. Hidden.

[Roland]

I was considering doing that. Ill give it a shot but the reason i have them out there is because it is easier to machine when the are on the same horizontal plaze with eachother. I will try and post a pic when i am done

[Roland]

Heres the clamp on the bike. Just 3d printed so not done in metal yet.

[Roland]

Also if anyone want a costom one, just send me a drawing of what you want it to look like and what bike it is for and i can design one up and if enough people want it i xan make a batch.

[critter]

great job looks neat i only dream was able to things like that  :2thumbup:

[furnimoto]

it is easier to machine when the are on the same horizontal plaze with each other

It's no fun if it's easy! I've been designing some triple clamps too(upper and lower), but I think it will be a bit before I get around to machining them. Good luck on yours!

[JR67]

Quick question, would you know what the offset is for the triple clamps? I am working on a project with 17" wheels and need something in the 45mm range. And fork diameter?
Thanks!

[Roland]

55mm offsett 41.3" fork diameter

[JR67]

Cheers!