Author Topic: Coolant temp sensor junkshow...  (Read 3294 times)

Offline moynistan

  • Motobrick Curious
  • Posts: 20
  • Ignorance is bliss...
Coolant temp sensor junkshow...
« on: September 21, 2012, 04:52:50 PM »
OK, I replaced my coolant temp sensor today, and when I pulled it, I saw this:


Pulled it out with a pick and it looks like this:


Looks like a rubber band accidentally dropped into the system(?!), but if anyone knows better please sound off.  I haven't had any coolant leaks in the system that I know of...  Guess i should be glad it ended up someplace that I could remove it so easily?

Cheers,
KM
Kevin Moynihan

1958 R26
2001 R1150GS
1991 K100RS4V

Offline frankenduck

  • Adrninistrator
  • ^ Quintessential Motobricker
  • Posts: 5513
Re: Coolant temp sensor junkshow...
« Reply #1 on: September 21, 2012, 05:06:58 PM »
Its probably sealant from the water pump cover.
Once I had a Collie pup. Dug a hole and covered him up. Now I sit there by the hour. Waiting for a Collie-flower.
New to K bikes? Click here.
K Bike Maintenance & Mods: Click here.
Buy parts here.

Offline moynistan

  • Motobrick Curious
  • Posts: 20
  • Ignorance is bliss...
Re: Coolant temp sensor junkshow...
« Reply #2 on: September 21, 2012, 05:36:43 PM »
Yup, when I cleaned up the timing chain cover, I found the extruded sealant to be the same stuff.  good to get it out at any rate.
Kevin Moynihan

1958 R26
2001 R1150GS
1991 K100RS4V

Tags: