Runnig light in mirror upgrade with pics

[subforry]

I added some dual filament bulbs (1157) to the mirror turn signals on my K1100RS.  I removed the connectors, used a Dremel to bore out the plastic holder to allow for a dual filament base.  The fit was tight enough but I used some thin CA glue.  Then ran wire from the headlight running light to the mirrors.  Uses standard 1157 bulbs.  Here are some pics.

[johnny]

righteous...

j o

[Scott_]

As you are running those, keep an eye on your plastic lenses for heat discolouration or deformation.
The heat generated from a running light in a space that wasn't designed for a incandescent running light may cause you problems.

I'm not saying that it absolutely will, but just beware that it's a possibility. 
You may consider a dual wattage LED lamp, same dual purpose but no heat....

[subforry]

Scott_ Thanks for the tip.  Will 1157 led bulbs work with the stock turn signal relay?