« previous next »
Pages: [1]   Go Down

Author Topic: Wrench size for larger steering head lock nut on '92 K75?  (Read 5905 times)

Offline TaosBrick

  • ^ Proficient Motobricker
  • Posts: 466
  • RedHotMotoBricker
Wrench size for larger steering head lock nut on '92 K75?
« on: May 06, 2015, 01:32:18 PM »
Yup, got me some play on th' steering head, alrighty. This kinda ch!t always happens when on the road, hundreds or even thousands of miles away from yer shop, right?
  Anyhey, what size wrench do I need for that big nut on top of the upper brace? I wanna get me to the nearest NAPA or wherever, buy a wrench and Deal With This Thing.
Logged
Flog It Every Day - I mean, the BIKE!
'92 K75, '73 R75/5 Café,'89 Yam XT350
Expect Nothing, Be Ready For Anything.
- Samurai Maxim

Offline TaosBob101

  • ^ Motobrick Curious
  • Posts: 72
Re: Wrench size for larger steering head lock nut on '92 K75?
« Reply #1 on: May 06, 2015, 03:09:23 PM »
 Is it in this pdf ??????????????

http://www.motobrick.com/index.php/topic,2252.0.html



Section 32 steering over in the card file Johnny re-did
Logged
  • Jefferson County, Colorado
  • 1995 K75S
1995 K75S

Offline TaosBrick

  • ^ Proficient Motobricker
  • Posts: 466
  • RedHotMotoBricker
Re: Wrench size for larger steering head lock nut on '92 K75?
« Reply #2 on: May 06, 2015, 03:42:17 PM »
Problem solved. Friendly neighborhood Auto Zone guy mic-ed it, 32mm, we tightened it up, no mo slop. Yay!
Logged
Flog It Every Day - I mean, the BIKE!
'92 K75, '73 R75/5 Café,'89 Yam XT350
Expect Nothing, Be Ready For Anything.
- Samurai Maxim

Offline TaosBob101

  • ^ Motobrick Curious
  • Posts: 72
Re: Wrench size for larger steering head lock nut on '92 K75?
« Reply #3 on: May 06, 2015, 04:01:10 PM »
  Now I know what size.......
Logged
  • Jefferson County, Colorado
  • 1995 K75S
1995 K75S

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7652
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Wrench size for larger steering head lock nut on '92 K75?
« Reply #4 on: May 06, 2015, 04:32:25 PM »
greetings...

itsa 32mm..

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7652
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Wrench size for larger steering head lock nut on '92 K75?
« Reply #5 on: May 06, 2015, 04:37:34 PM »
greetings...

the 1st thing i would do is replace the fuel filter... reset the 4pin under tank fuel pump connector... reset the jetronic connector...

see how it goes...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline TaosBrick

  • ^ Proficient Motobricker
  • Posts: 466
  • RedHotMotoBricker
Re: Wrench size for larger steering head lock nut on '92 K75?
« Reply #6 on: May 06, 2015, 04:45:52 PM »
Fuel filter replaced, no change in symptoms - that were on my other post ;-)
Logged
Flog It Every Day - I mean, the BIKE!
'92 K75, '73 R75/5 Café,'89 Yam XT350
Expect Nothing, Be Ready For Anything.
- Samurai Maxim

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7652
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Wrench size for larger steering head lock nut on '92 K75?
« Reply #7 on: May 06, 2015, 05:41:40 PM »
some will say leaking rubber hoses... some will say whack valves...

this same thing happened to me on the eleven hundert motobrick a ways back... it was the throttle positioning sensor adjustment...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny
Pages: [1]   Go Up
« previous next »
Tags: