MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: zipster68 on April 26, 2017, 11:30:25 AM
-
Hi all,
Posted a query on this issue last season, and can't find it. Anyways, had a pronounced miss when hot, ran fine when cold. Possible suggestions were coils, wires, hall effect sensor, fuel air. Anyways, bought a nice used coil pack on eBay, and voila! Problem solved.
Just posting in case anyone can use the info.
-Ray
-
Posted a query on this issue last season, and can't find it.
I found it by looking in your post history under your profile. It's at this link (http://www.motobrick.com/index.php/topic,9190.msg73265.html#msg73265). Consider finishing off that thread with the good news so if somebody goes there before they arrive here they'll pick up your solution sooner.
-
Thanks so much for the follow up. Hope you follow Laitch's suggestion to post in the original thread.
Early ignition coils are a known weak point, and many just replace them with the new design coils. Glad to hear you have your bike running for the upcoming riding season.