« previous next »
Pages: [1]   Go Down

Author Topic: Hi and Lo beam good, but no Hi flash...K100RS4V  (Read 3503 times)

Offline moynistan

  • Motobrick Curious
  • Posts: 20
  • Ignorance is bliss...
Hi and Lo beam good, but no Hi flash...K100RS4V
« on: September 16, 2012, 08:31:03 PM »
I disassmbled the switchgear per Lieberry instruction.  Everything is clean, and wiring/soldering looks great. I can see what is happening when I move the switch and cannot understand why the Hi beam won't flash... :dunno2:

Any takers?
Logged
Kevin Moynihan

1958 R26
2001 R1150GS
1991 K100RS4V

Offline Inge K.

  • ^ Quintessential Motobricker
  • Posts: 1451
Re: Hi and Lo beam good, but no Hi flash...K100RS4V
« Reply #1 on: September 16, 2012, 08:37:39 PM »
Do you got power on the green/blue wire? If not, check the connector under the tank.

Inge K.
Logged
  • Norway

Offline moynistan

  • Motobrick Curious
  • Posts: 20
  • Ignorance is bliss...
Re: Hi and Lo beam good, but no Hi flash...K100RS4V
« Reply #2 on: September 17, 2012, 12:24:34 PM »
Thanks, obviously I'm pretty limited in my understanding of electrical matters, I appreciate your patience with a noob.

SOLVED:  missing micro screw on hi low beam switch replaced and cleaned contacts, reconnected and good to go. 

Logged
Kevin Moynihan

1958 R26
2001 R1150GS
1991 K100RS4V
Pages: [1]   Go Up
« previous next »
Tags: