Author Topic: Another Barnfind! $300  (Read 147 times)

Offline Atabeach

  • ^ Proficient Motobricker
  • Posts: 236
Another Barnfind! $300
« on: November 19, 2026, 10:07:07 AM »
1995 k75S ABS
The good: I got it to start, all lights work, the fan clicks on, shifts smoothly & brakes work. Alternator charges nicely. Propane test ( no change in rpm’s at 1.2k ) coils test 1.5 primary 10 secondary
The bad: Can’t get it to idle nice…Tank leaks, abs not working, will remove.Forks pitted & leaking
Balanced throttle bodies… balanced well at all rpms. (# 3 was out more than 1&2)
The bike will run ok with brass screws 1&2 all the way in…not sure if that is relevant.
 UPDATE! The bike is running better after an Italian tune up…good enough for now
Question;
Forks are Showa and are pitted badly…Option #1 is sand them smooth # 2 Can I swap them out entirely? Or are the triple clamps too big? Please see attached photos. Can/ should I just sand out the blems?
 Also has anyone had success replacing seat cover?
  • Ponte Vedra Fl
  • 1994 k75 Standard, 1985 k100 ( BFK 49 states) 2002 Harley’s Dyna, NEW 1999 R1100SA & my favorite 2006 Vespa LX150!

Offline Ingo

  • ^ Motobrick Curious
  • Posts: 109
Re: Another Barnfind! $300
« Reply #1 on: Today at 01:53:01 PM »
The rust on fork in the triple tee is of no consequence.  Rust further down will erode the fork seals. If marginal you could clean and fill in with like JB-Weld. Otherwise replacement would be indicated.  Any upholstery shop can replace the seat covering. You even get to choose the material. And it's not overly expensive.
  • Janesville,  WI
  • 1992 K1100LT
You can't have everything; where would you put it?!

Tags: