« previous next »
Pages: [1]   Go Down

Author Topic: Spark Plug Dress-Up Cover Question  (Read 2795 times)

Offline BryanD

  • ^ Motobrick Curious
  • Posts: 62
Spark Plug Dress-Up Cover Question
« on: March 08, 2019, 04:32:12 PM »
OK, so I noticed when I first purchased my 95 K1100rs that the little "BMW 4-Valve" logo spark plug cover panel was not on my bike.  So I've been looking for one for some time and finally ran into one at a decent price.

When I went to put it on, I noticed that a 5mm screw wouldn't start, so I figured it was a 4mm.  When I appropriated the screws, to my surprise, they slid right into the hole.  $%#@$, too small!  So what the heck?!  5mm too big and 4mm too small. Thinking 4.5mm now. 

But WAIT....  I checked the holes in the valve cover and to my surprise, they had never been tapped for bolts....

So now I'm wondering, did the 1100rs even have the cover installed in the FIRST place?  I mean the belly pan covers everything for all intents and purposes.  Did they not put that panel on the RS?  Anyone know?
Logged
  • Louisville
  • 95 K1100rs

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7652
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Spark Plug Dress-Up Cover Question
« Reply #1 on: March 08, 2019, 05:05:04 PM »
greetings...

none of my eleven hundert reise strasse motobricks had that sparkplug cover...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline BryanD

  • ^ Motobrick Curious
  • Posts: 62
Re: Spark Plug Dress-Up Cover Question
« Reply #2 on: March 08, 2019, 05:15:49 PM »
Thanks, johnny.  Somehow I knew you would be the one to answer.

I know that there is at least ONE in the nation that has one now...  :) 
Logged
  • Louisville
  • 95 K1100rs

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 11299
Re: Spark Plug Dress-Up Cover Question
« Reply #3 on: March 08, 2019, 07:28:53 PM »
Quote from: BryanD on March 08, 2019, 04:32:12 PM
So now I'm wondering, did the 1100rs even have the cover installed in the FIRST place?  I mean the belly pan covers everything for all intents and purposes.  Did they not put that panel on the RS?  Anyone know?
The MAX BMW parts fiche lists spark plug covers as being available for the LT but not for the RT. That seems to imply that the RT wasn't drilled to accommodate them. The LT covers—just for the spark plugs—is over 150USD.  :euro
Logged
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Offline BryanD

  • ^ Motobrick Curious
  • Posts: 62
Re: Spark Plug Dress-Up Cover Question
« Reply #4 on: March 08, 2019, 07:41:15 PM »
Yeah, I'm kind of understanding that now.  But if you think about it, it seems a bit "unfinished" in that regard.  You have 4 really nice mounting holes in your cover and these ugly, uncovered wires without one.

I guess BMW felt no one would ever care since the RS fairing does indeed cover all but the very tail end of this area. 

Oh well....  I have one now.  Cost me 13.85 plus 11 ship.  And $4 for the bolts and washers.  And a few lost hairs from scratching my head.   
Logged
  • Louisville
  • 95 K1100rs
Pages: [1]   Go Up
« previous next »
Tags: