Fellow brickriders,
A little intro; I'm a Dutch 24yo who got dumped for being to busy with his K, now it doesn't ride anymore, so please help me fix it and let it be worth it ;)
I bought the K100LT '90 and have it for almost a year now, had a lot of help from my friends and turned it into this;
*See Attachment*
So.. it was done, but there is always room for some improvements..
I wanted to have these little cones instead of the big airfilterbox, started, but with a little bit of gas it turned off.
Someone walked by and told us that it was the air regulator, checked it and took it out of the box and did some testing, sometimes it run sometimes it didnt.
Started being dark so we stopped working on it.
Next day i decided to remove the ABS system (to make it as naked as possible).
Took of the two big oil containers and... also the cables..
Now it doesnt run. Lights are working and tries to start when pushing the green button but no vroemmm.
Gaspump works and pushes it into gashose.
Question:
Did i screw up with removing the cables going to the ABS brain?
If thats not it. Maybe it's the air regulator?
All help is greatly appreciated!
