Hello motorbrickers,
My 89 K75 runs absolutely beautifully upon startup, but as it gets warmer, it starts to run rougher. When nearly at full temperature, it will stutter when I give it a shot of gas. From my limited experience, this sounds like tight valve clearances: when the engine heats up, the valves expand and are not leaving enough clearance.
I thought I would check the clearances (as I have not done this since owning the bike) in any event, but I am curious to know if any of you have thoughts as to what else might cause this issue? Supposing the valve clearances are all perfect, where would be the second place I look?
Thanks.