I'm selling my restoration project, here's the full story:
Bought everything new, OEM. The list of parts includes ALL seals for engine and transmission, ALL coolant hoses (including the little clear one for the coolant bottle), cam and crank cover gaskets, intake rubbers and clamps, clutch release bearing boot, clutch plate, swingarm bearings, front brake lever, fuel lines, fuel filter, oil filter, front caliper covers (the finned plastic parts), fork seals and dust boots, steering head bearings and some stuff I'm sure that I'm forgetting. I also purchased new Pirelli Sport Demons in the correct OEM sizes.
The bike has a Fox Twin-clicker shock and Bassani exhaust, System cases with NO cracks and the input shaft, output shaft, driveshaft and final-drive splines are PERFECT. The bike runs perfectly except for a leaking rear main seal which is why I tore it down. I figured "in for a penny, in for a pound" and bought everything to completely renew the motorcycle. It was at this point that I decided to send the plastics off to be soda blasted to remove the paint which was fading and cracking. The establishment that did the blasting assured me that everything would be fine and I took them at their word since they are a Corvette restoration shop. To make a long story short, they ruined my plastics except for the batter covers and belly pan, which I did not send since they were OEM replacements and did not need to be blasted. The only parts that have been installed are the swingarm bearings, transmission seals and fuel lines and filter. Everything is cleaned and awaiting reassembly.
I have lost all enthusiasm for the project since the plastics were blasted and wish to sell everything. I'm sure that I don't have to tell anyone on here the cost of all of these OEM parts. The bike has never been crashed, it is arrow-straight and I have the clean and clear title, in my name.
The bike is in Lititz, PA.
$1500 or best offer for everything. 717-626-4210 I realise that I'm not going to recoup what I've spent, I just want it gone.