« previous next »
Pages: [1]   Go Down

Author Topic: SOLD  (Read 2481 times)

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 974
  • "I'd rather be flying, but this will do nicely"
SOLD
« on: September 07, 2018, 11:06:20 PM »
Sold


My manual indicates new rotors measure 4.3-4mm







Minimum thickness spec is 3.556mm

My rotors measure 3.91mm

replacement bike is abs.

$80 shipped in USA  Fits nicely in Large flat rate USPS priority box

paypal rcgreaves@gmail.com

Logged
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline Jethroww

  • ^ Motobrick Curious
  • Posts: 102
Re: FS K75 front rotors, used, good condition
« Reply #1 on: September 08, 2018, 07:02:28 AM »
Hi, PM sent
 Thanks Jethroww
Logged
  • Ontario,Canada
  • BMW 1974 R75/6, BMW 1988 K75s 1989 BMW K100RS-SE Past: 1972 Norton Commando Combat

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 974
  • "I'd rather be flying, but this will do nicely"
Re: FS K75 front rotors, used, good condition
« Reply #2 on: September 08, 2018, 01:16:21 PM »
 I am heading out to visit a friend who has a dial caliper and I’ll give you proper measurements of the thickness of these calipers check that I need rotors
Logged
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"
Pages: [1]   Go Up
« previous next »
Tags: