Hey guys, as some of you may know i finished a k100 build a couple months ago and rode it to school, I left it at school for a week and documented it on here. After, when I was riding it home I did a little speed pull because I was trying to set the rings kinda just wring it out because we all know it will run better with some breaking in, it was the first time I had really given it any gas. It then died and left me stranded. It would fire for a second every time I hit the starter but then fall off, I pushed it almost a mile back to my shop. I let it sit there for 2 months because I was burnt out on the project. I then took it down to the block, cleaned the throttle bodies and injectors, but most importantly I checked all my spark plug wires and all plugs had spark and that makes sense because the bike does/did fire even for a second. I put it all back together and it ran rough but I rode it around my shop for a couple minutes and it seemed alright so I took it down the road with a lil speed pull (bit of boost lag but it felt great). And I get to the end of the street and it dies, same thing as last time and it won't idle just dies, throttle doesn't help. I have undone the fpr vacuum hoses tried to blow them out without prevail. I have no idea what the issue is, I unplugged the tps and it didn't help, I do not have any idea what the issue is.
Any suggestions are greatly appreciated.
Thank you all very much.
-Ben
