« previous next »
Pages: [1]   Go Down

Author Topic: FS ~ Laminar Lipp For RS Motobrick  (Read 5466 times)

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
FS ~ Laminar Lipp For RS Motobrick
« on: March 13, 2016, 04:44:59 PM »
greetings...

slightly used laminar lip for the rs motobrick... comes with extra dual lock... you pay $40 for the lipp and lock and includes usps shipping from cheezconsin via paypal...







j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline jakgieger

  • itinerant farmer
  • ^ SuperNatural Motobricker
  • Posts: 618
Re: FS ~ Laminar Lipp For RS Motobrick
« Reply #1 on: March 14, 2016, 09:15:24 AM »
Does it really work??...to raise the "envelope" on the rs.  At 6'2, I have buffeting in upright position on the 89 rs.
Logged
  • Kansas USA
  • 1989 K100rs se
"What we've got here is failure, to communicate.  Some men, you just cain't reach.  So you get what we had here last week.  Which is the way he wants it...Well, he gets it.  I don't like it any more than you men do."

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
Re: FS ~ Laminar Lipp For RS Motobrick
« Reply #2 on: March 14, 2016, 10:27:20 AM »
greetings...

no envelope guarantee...

this is what it did for me... it pushed the blast from nipple level to top of the helmet level...

i gotts to have air on me... so a full windshield moto aints for me... this aints for me...

this isnt like a full windshield deal... not even close...

its 50/50 that it will do what you want...

j o

Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline mw074

  • ^ Proficient Motobricker
  • Posts: 452
Re: FS ~ Laminar Lipp For RS Motobrick
« Reply #3 on: March 14, 2016, 11:40:37 AM »
I have used several of the Laminar Lips. One on a K1200GT and one on a Vrod. They work well. Better to bolt them on than use the velcro, if you hit plus 100 mph. Laminar offers bolt on kits free if you buy the Lip. I'm sure it would be no problem to get a kit from them. Use the velcro to find the right fitment, then bolt them on.
Logged
  • Michigan

Offline mw074

  • ^ Proficient Motobricker
  • Posts: 452
Re: FS ~ Laminar Lipp For RS Motobrick
« Reply #4 on: March 14, 2016, 11:47:06 AM »
I should have said that they worked well for me to correct helmet buffeting.
Logged
  • Michigan

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
Re: FS ~ Laminar Lipp For RS Motobrick
« Reply #5 on: March 14, 2016, 12:26:48 PM »
greetings...

i like helmet buffeting...  my vision blurs from helmet buffeting at 140mph... since my car tiors are speed rated only to 140mph... and since i caint make out my tach due to blurred vision... its  time to hold it steady...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline Exxelon

  • Curious
  • Posts: 1
Re: FS ~ Laminar Lipp For RS Motobrick
« Reply #6 on: July 25, 2016, 04:31:43 AM »
I am interested, newby need coaching on the procedures!
Logged
  • Downey Ca
  • K75C, K100 LT RS, K110 LT RS

Offline kryder

  • Realryder
  • ^ Motobrick Curious
  • Posts: 70
  • Ryde ' em when I can.
Re: FS ~ Laminar Lipp For RS Motobrick
« Reply #7 on: August 17, 2016, 09:15:56 AM »
Quote from: mw074 on March 14, 2016, 11:40:37 AM
I have used several of the Laminar Lips. One on a K1200GT and one on a Vrod. They work well. Better to bolt them on than use the velcro, if you hit plus 100 mph. Laminar offers bolt on kits free if you buy the Lip. I'm sure it would be no problem to get a kit from them. Use the velcro to find the right fitment, then bolt them on.

I have cruised for long periods at 100 to 110 mph without issue using the standard Velcro tabs. I am not saying that bolting them on is a bad idea I am merely stating I have had no issues in the 100 to 110 range. And yes, there are places out west you can get away with those speeds.
Logged
  • Salida, Colorado and Park City, Utah
  • 1993 K75S
I live west and ski west, I ride east and west and sometimes north and south.

Motos currently owned,  or do these motos own me?
1993 K75S ( the Kryder )
2000 R1100S ( Blackie )
1986 R80RT ( Ole Red ) 1986 R80RT ( Ole Blue )
1994 BMW R1100RS ( Traveler )

Motos I have owned in the past; gone but not forgotten.

1964 Yamaha 55cc YJ1-K ( ringdinger )
1965 Yamaha Santa Barbara 125 ( ringdinger #2 )
1966 Honda CB160
1971 Honda CL350
1973 Yamaha RD350
1987 BMW K75T
1992 BMW K75S
1994 BMW R1100RSL
1978 BMW R100RS
Pages: [1]   Go Up
« previous next »
Tags: