« previous next »
Pages: [1]   Go Down

Author Topic: Seat  (Read 3627 times)

Offline RetDet

  • Motobrick Curious
  • Posts: 12
Seat
« on: May 22, 2013, 05:19:41 PM »
Greetings all, will a stock seat from a 95K1100LT fit a 93 K75RT? Thanks in advance, Ed
Logged

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7652
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Seat
« Reply #1 on: May 22, 2013, 06:37:57 PM »
stock seats... it should fit... 84 and 85 motobricks are unique... 86 to 97 motobricks are the same... there was a hinge change in 93... solid to rubber mount... butts that shouldnt matter here... low seats and popo seats are another deal altogether...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline skidmore

  • ^ Motobrick Curious
  • Posts: 87
Re: Seat
« Reply #2 on: May 23, 2013, 11:51:30 AM »
What about a K100RS high/regular seat and a K75 low seat? Would they interchange with nothing more than performing the "typical" low-to-high conversion tasks?
Logged
current: 1992 K75RT ABS and elec windshield, baby!

previous: 1992 K75, 1983 R100, five spooo-ooort bikes, a Sportster, two XS650 Specials....and probably a partridge in a pear tree somewhere along the way
*******************
Frankenduck said: "I haven't backfired a K75 in lord knows how many miles - but I could if I wanted to."

Offline RetDet

  • Motobrick Curious
  • Posts: 12
Re: Seat
« Reply #3 on: May 29, 2013, 09:52:44 PM »
I put the new seat on today and the under seat tray will not allow a good fit. When I remove the cover of the bin the seat closes better, but not perfect. I dug a little deeper checking the battery area. The battery tie down on the right side will not reach the area it screws into. Could the previous owner have installed a battery that is too tall? Any advice would be appreciated. Ed
Logged
Pages: [1]   Go Up
« previous next »
Tags: