1988 K100RS SE Temp Gauge and gauge wiring harness needed

[crazychester]

Anyone have a temp gauge and gauge wiring harness for a 1988 K100RS? I believe the harness for this part of the bike feeds the fuel gauge and the temp gauge. I need the temp gauge and the wiring harness that goes to it. FYI, the part numbers for these parts are as follows:

62 13 2 305 069    TEMPERATURE GAUGE
61 12 1 459 488    WIRING ADDITIONAL INSTRUMENTS

Thanks.

Martin (in St. Louis)

[robleyd]

Have a look at Duck's site - http://www.kbikeparts.com/

[frankenduck]

Just wire it up yourself.  It's very easy.

Brown - Brown
Gray/Blue - Gray/ Blue
Green/Black - Green/Black
Black to temp sensor lead

[50abo]

Just wire it up yourself.  It's very easy.

Brown - Brown
Gray/Blue - Gray/ Blue
Green/Black - Green/Black
Black to temp sensor lead

I have the schematics and I found that there might be a 4-pin 'Connector for Additional Instruments' as it stands in the papers of K100RS. I have not found a similar connector in my K1100RS -94.
If there is such a connector, please tell me where. I would like to make the connection 'right way'.

In the relay box under the tank there is a round connector with four holes, but the colours of the wires don't match.

My page: http://ptm2.cc.utu.fi/~ptmusta/kuvat/MP/BMW/