I have a few bits left over from a recent refresh of my K100RS 2V. Paypal OK!
First up is a set of brand new BMW fairing boots for your front forks, part number 46 63 1 450 620 ($29 each). I bought a set of these and gaiters and was hoping to use them together, but it will only work with one or the other, so I used the gaiters. I will include a used set of front fork dust boots which are in good condition, as well as 6 of the little black plastic square nuts to attach the fairing boots (but you will need 12 total). Paid $60, looking for $50 shipped or best offer.
I also have a brand new in the pack rear main seal (also known as the output shaft seal). This is the big seal behind the flywheel, part number 11 11 7 666 186 ($30 each). For some reason they sent me two of these and of course I can only use one. This is not new old stock, it is the latest seal design and it is meant to be installed 0.5mm above the face of the crankcase instead of flush as the original seal. That's why I'm including a 0.5mm thick spacer to act as a stop during installation, as well as a piece of wood with a hole in it for bashing it into position. No problem, my installation is leak free. Make an offer for this "kit" and feel free to ask questions as I just did this job on my own bike.
