« previous next »
Pages: [1]   Go Down

Author Topic: K75 Motobins Driveshaft spline insert  (Read 5749 times)

Offline brichbk

  • ^ Proficient Motobricker
  • Posts: 119
K75 Motobins Driveshaft spline insert
« on: July 17, 2021, 11:59:24 AM »
FS: Motobins Driveshaft spline insert.  I bought it to replace my driveshaft splines but don't need it now.  $100 with free shipping to the continental US.

https://photos.app.goo.gl/WExSDWACRJWtQE887
https://photos.app.goo.gl/1sY3ttqRa4nzZneCA
Logged
  • Central Valley California
  • 1993 BMW K75RT // 1982 Honda Nighthawk 650sc

Offline Past-my-Prime

  • ^ SuperNatural Motobricker
  • Posts: 581
  • All of us are better when we're loved.
Re: K75 Motobins Driveshaft spline insert
« Reply #1 on: July 19, 2021, 08:29:14 PM »
So do you have the old driveshaft end cut off and then does this just get welded on where the old splines used to be?
Logged
  • North Shore of Lake Superior (in my garage)
  • BRICK: 1989 K75 RT - Rocinante; NON-BRICK: 2007 F650 GS Dakar - Betty Blue

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 11299
Re: K75 Motobins Driveshaft spline insert
« Reply #2 on: July 19, 2021, 10:39:00 PM »
Quote from: Past-my-Prime on July 19, 2021, 08:29:14 PM
So do you have the old driveshaft end cut off and then does this just get welded on where the old splines used to be?
From the Motobin K100 parts pages. It could be self-explanatory.  112350
Logged
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 974
  • "I'd rather be flying, but this will do nicely"
Re: K75 Motobins Driveshaft spline insert
« Reply #3 on: July 23, 2021, 03:54:07 PM »
I dont need it but have the TIG and skills to attach/balance.  Cheers. FOB 53554
Logged
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"
Pages: [1]   Go Up
« previous next »
Tags: motobins driveshaft splines