Ricoh Intimidators

[Lastunder]

Has anyone used 41mm Ricoh Intimidators (http://store.ricorshocks.com/product_p/041-20-1001bmw650.htm) on a K75C?  I have an ‘86 that I’m thinking of trying them on to reduce the braking tuck a bit. 41 mm is the right size I think

[johnny]

greetings...

sounds like its time for new fork springs... ive had works and progressive... both reduced braking tuck... butts proper flush and fill has tremendous results too...

no kinda contraption is gonna work if your springs are weak and your innards are  clogged...

race tech are the only ones who make emulators for oe motobrick forks...



j o

[billday]

I watched the video and I still don't understand.

I need to start emulating a much smarter person.

[Lastunder]

While I’m inclined to just take J’s advice and run with it, wouldn’t 41mm emulators from anyone be better than stock?  Have fresh oil, good seals, but stock springs.

[johnny]

greetings...

the race tech thread on there... not all bricks have the same threads... and they are just a cap if you dont do the whole mod...

go getts them ricor dropins and report back here... me and billyday wanna see them on a brick for sure...

j o

[Lastunder]

On it!😄😄