« on: July 17, 2018, 09:38:16 AM »
Is there an insert for the centerstand, to fill the holes, and provide a resting surface, other than the steel tubing?
It seems a piece of hard plastic (nylon, ABS, etc.) could go in to the hole with a slight interference fit, and then have a flat spot on the bottom to rest on.
Logged
- North Alabama
- 1985 K100RT very original
Ken
Current: 85 K100RT, 09 DL650, 16 4RT260, 97 XR100, 70 CT70, 06 YFM400
Past Bikes: 86 K100RT, 85 K100RS, 07 SV1000S, 80 KL250, 99 GS1100, 85 K100RT, 86 VFR700, 91 XR250, 95 VLX600, 86 TRX250, 02 GZ250, 83 Z50R, 78 ATC90, 86 XR250, 79 XR500, 72 AT1, 75 YZ360, 78 DT400, 75 DT125, 73 Trail 70
Topic: centerstand "feet" (Read 2639 times)