MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: whosyurdaddy on June 03, 2017, 06:48:41 AM
-
I'm going to synch my TB's this weekend and I noticed on the #1 TB there is a vacuum hose connected in place of a cap . I've checked on line also my Clymer and I've come up empty except the possibility California emissions . Now if it were cold and crappy out I would gladly take the time to disassemble and trace but it's not and I want to ride .What is it ?
-
I'm going to synch my TB's this weekend and I noticed on the #1 TB there is a vacuum hose connected in place of a cap . I've checked on line also my Clymer and I've come up empty except the possibility California emissions . Now if it were cold and crappy out I would gladly take the time to disassemble and trace but it's not and I want to ride .What is it ?
Go ride then return and trace the line to its other connection; otherwise, please post a couple of photos of this confounding element and its place in the scheme of things.
-
I'm going to synch my TB's this weekend and I noticed on the #1 TB there is a vacuum hose connected in place of a cap . I've checked on line also my Clymer and I've come up empty except the possibility California emissions . Now if it were cold and crappy out I would gladly take the time to disassemble and trace but it's not and I want to ride .What is it ?
Get yourself a t piece connector, I use one from fish tank accessories, connect the vac hose, tb and sync hose as one. Job done.
Sent from my iPad using Tapatalk
-
on the #1 TB there is a vacuum hose connected in place of a cap. What is it ?
It's for the fuel pressure regulator.