MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Dbarcle1@gmail.com on April 29, 2017, 07:07:57 AM

Title: injector seals
Post by: Dbarcle1@gmail.com on April 29, 2017, 07:07:57 AM

Hi all, I think this got lost in the last post.  I have a leaking injector seal, what parts do I order?  The book says 2 seals per injector so just bite the bullet and replace the lot?  David

Title: Re: injector seals
Post by: johnny on April 29, 2017, 07:24:42 AM

greetings...

what year and model... previous posts indicated 1984 k100rs...

to know for sure put the last 7 digis of your vin in here... (http://www.realoem.com/bmw/enUS/select)

then use the fiche to find your part numbers and quantities here... (http://www.realoem.com/bmw/enUS/select?product=M&archive=1&series=89V1&model=K+100+RS+%280523%2C0533%29&market=EUR)

there you go... its that easy...

j o

Title: Re: injector seals
Post by: Dbarcle1@gmail.com on May 01, 2017, 08:24:37 AM

Ok I'll try that, thanks