MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: PNTdickson on February 23, 2017, 10:01:14 AM

Title: 1985 K100 LT conversion to round standard headlight
Post by: PNTdickson on February 23, 2017, 10:01:14 AM

Hello All,


Have removed my fairing and purchased a standard headlight (round) and associated headlight fairing.  Question - are specific headlight brackets needed for the round headlight?


Thanks.  Paul

Title: Re: 1985 K100 LT conversion to round standard headlight
Post by: Laitch on February 23, 2017, 10:31:46 AM

Please post pictures of the fairing and the headlight.

Title: Re: 1985 K100 LT conversion to round standard headlight
Post by: PNTdickson on February 23, 2017, 02:55:44 PM

Thanks for the quick reply.  The pictures of the fairing and headlight are attached.  Just not sure about the headlight bracket.  Thanks very much.


Paul

Title: Re: 1985 K100 LT conversion to round standard headlight
Post by: Laitch on February 23, 2017, 04:28:46 PM

Do you have the rear panel for the headlight cowl? Scroll down through this article (http://www.kbikeparts.com/classickbikes.com/ckb/1.my.k.bikes/10_K75F/k75f.3.build.htm) to see illustrations and a bit of explanation concerning this assembly. Attached is the part illustrated (red arrow) in the MAX BMW fiche.

Title: Re: 1985 K100 LT conversion to round standard headlight
Post by: PNTdickson on February 23, 2017, 06:06:58 PM

Yes, I do have the back panel.  I was thinking that an additional bracket was needed.  Your included diagram makes it pretty clear.  That is very helpful.  Thanks very much for the clarification.