MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: zalle on January 27, 2017, 02:40:30 PM

Title: Is ABS working? 1992 K1100
Post by: zalle on January 27, 2017, 02:40:30 PM

Hi guys, when I turn on the key, I get 3 red lights, oil, battery and temp. And a tik tak sound, like an indicator. When I press the ABS button the tik tak goes away... Is it normal? Or is my ABS gone?


Thanks

Title: Re: Is ABS working? 1992 K1100
Post by: The Mighty Gryphon on January 27, 2017, 03:20:43 PM

I suspect the indicator bulbs for the BMU and the ABS are not working.  Normal operation is lights come on with ignition, and go out after bike has started moving and front and rear brakes have been applied.  In the meantime, the lights blink and the relay that blinks them is what you hear. 

Title: Re: Is ABS working? 1992 K1100
Post by: zalle on January 28, 2017, 08:04:40 AM

OK, so I replaced bulbs. Red triangle and ABS lights start blinking after the bike moves and I apply brakes.

Title: Re: Is ABS working? 1992 K1100
Post by: Laitch on January 28, 2017, 03:18:24 PM

Quote from: zalle on January 28, 2017, 08:04:40 AM

Red triangle and ABS lights start blinking after the bike moves and I apply brakes.

Read and enjoy this (http://www.motobrick.com/index.php/topic,538.0.html), zalle.