MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: purplehaze on December 21, 2016, 06:13:24 AM

Title: Using the old dashboard circuitry to maintain the functions.
Post by: purplehaze on December 21, 2016, 06:13:24 AM

Hi I'm new to the forum and this is my first post.
I take the opportunity to say hello to the all Comunity.
I've acquire a beautiful K100RS last year with the intention to turn it into a vintage looking bobber.
The dashboard being so bulky had to be replaced with smaller unit, I went for a combo speedometer and tachometer Daytona Velona.
Unfortunately this meant that I will loose all the extra bits that where incorporated in the original dashboard.
This is when I wondered if anyone had successfully reused the circuits boards from the original unit and somehow incorporated them just like with the speedo sensor chip.....

Title: Re: Using the old dashboard circuitry to maintain the functions.
Post by: Glacial on December 21, 2016, 09:09:29 AM

Hello and welcome to the forum from another Brit.


Everyone will want to see pictures of the beauty you started with and the current configuration.  Half will commend you on your design genius, the other half will give you stick for turning beautiful to ugly - brace yourself!


There is a lot of information already here about the dashboard/instrument cluster so make sure you try some searches for the info. I can't help you with that issue as I'm one of those who favours tailoring my K with bolt-ons rather than by cutting bits off.

Title: Re: Using the old dashboard circuitry to maintain the functions.
Post by: Laitch on December 21, 2016, 09:29:21 AM

Quote from: purplehaze on December 21, 2016, 06:13:24 AM

I've acquire a beautiful K100RS last year with the intention to turn it into a vintage looking bobber.

Welcome! Put the year of your bike in your profile, too, so it will show up in every post because there have been a few variations throughout the years.

I thought dilapidated bikes—not beautiful ones—were used to create bobbers, instead of the reverse. Just goes to show there's more things in heaven and earth than are dreamt of in my philosophy.
:giggles
As far as adapting new instruments to reproduce functions of the originals, take a look at the reference links in reply #4 of this recent thread (http://www.motobrick.com/index.php/topic,9283.msg74892.html#msg74892). These are only a few of several discussions concerning your interest.

Title: Re: Using the old dashboard circuitry to maintain the functions.
Post by: The Mighty Gryphon on December 21, 2016, 09:31:29 AM

Welcome to the crazy world of brickheads!

Have fun with your K!

Title: Re: Using the old dashboard circuitry to maintain the functions.
Post by: The Dude on December 21, 2016, 01:13:19 PM

Welcome 'haze.
Less is more with a Bobber?
Just a speedo for the MOT.The rest's just tinsel. :dunno
All the best,anyway.

Title: Re: Using the old dashboard circuitry to maintain the functions.
Post by: purplehaze on December 22, 2016, 03:34:34 AM

Thanks everyone for the suggestion, I've follow the traces on the dashboard circuit and it locks relatively simple. I will try to hide the boards inside the front light and part from a dyod that can even be reused from the cluster there is nothing else separating me from having the reserve warning light function restored. For example....
I will post the result when if I getting working.