MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: r100rs77 on December 16, 2016, 10:24:12 PM

Title: Replacing K bike turn signal paddles
Post by: r100rs77 on December 16, 2016, 10:24:12 PM

Does anyone have a schematic or photos that describe disassembling the right and left handlebar switches to replace the turn signal paddles?  Or, can you direct me to a site that might display same?  Thanks in advance.

Title: Re: Replacing K bike turn signal paddles
Post by: Scott_ on December 16, 2016, 10:58:00 PM

(http://www.maxbmwmotorcycles.com/fiche/Diagrams/B0001910.png)
(http://www.maxbmwmotorcycles.com/fiche/NotesParts/61319062462_3_B.jpg)

The paddles should be capable of being changed without much disassembly. Single screw from the bottom.

Title: Re: Replacing K bike turn signal paddles
Post by: Chaos on December 16, 2016, 11:49:28 PM

easy peasy to replace the paddle.  Bikebandit lists the pair for $9  http://www.bikebandit.com/oem-parts/1986-bmw-k75s/o/m109#sch336004

Title: Re: Replacing K bike turn signal paddles
Post by: r100rs77 on December 17, 2016, 04:22:55 AM

Thank you for the quick response.  I think I can do it.

Title: Re: Replacing K bike turn signal paddles
Post by: The Mighty Gryphon on December 17, 2016, 10:30:26 AM

Hey, welcome to the knuthouse!  Don't be a stranger.  Got any photos of your bike?

Title: Re: Replacing K bike turn signal paddles
Post by: Martin on December 17, 2016, 03:34:16 PM

Welcome to the asylum from the land of OZ.
Regards Martin.