MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: kaleb on December 06, 2016, 07:57:13 AM

Title: 1993 k75 - ABS removal...
Post by: kaleb on December 06, 2016, 07:57:13 AM

Hi folks


I've just parked the bike up for Winter and have a small list of jobs, one of which is to remove the non-functioning ABS system.


The modulators are heavy and get right in the way whenever I try to tinker. Also, both of their mounting brackets are bent or missing parts so the modulators weight isn't properly supported from underneath putting an undue load on the hose connections, which I don't like.


So, to cut to the chase, does anybody know what lengths of brake hose I would need to buy for a 1993 k75 with its ABS modulators removed.....?


Or if not, can anyone advise from experience how best to go about measuring this?


Thanks a lot!

Kaleb.

Title: Re: 1993 k75 - ABS removal...
Post by: jaxon on December 06, 2016, 10:56:46 AM

I believe you can get a kit from Spiegler for a non-ABS equipped bike.


http://bit.ly/2hcGhtX