MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: Garf on November 28, 2016, 05:30:04 PM

Title: Rear brake disc
Post by: Garf on November 28, 2016, 05:30:04 PM

Greetings, I need to replace the rear brake disc on a 87 K75S (non ABS). Can anyone suggest a after market brand and part #. The BMW replacement is mighty pricey.
Also, aftermarket pads would be great.
Appreciate any input you can give.
PS The old bolt removal was a real bummer (Heads were rounded out by previous owner so it was the drill, heat and extract routine)

Title: Re: Rear brake disc
Post by: Martin on November 28, 2016, 05:43:45 PM

You need to post what country you are in. I've used both Moto Bins, Motorworks in the UK. Beemer Boneyard in the US. EBC, Brembo, Goodridge are probably what I would go for.
Regards Martin.
 

Title: Re: Rear brake disc
Post by: Garf on November 28, 2016, 05:47:15 PM

Thanks for the reply. I'm in the USA

Title: Re: Rear brake disc
Post by: Martin on November 28, 2016, 06:01:38 PM

Put the state town and country next to the bikes you own, it would be most helpful.
Regards Martin.

Title: Re: Rear brake disc
Post by: Chaos on November 28, 2016, 07:20:41 PM

Amazon has an EBC rotor for $179, prime, you might find a used one for $80 or so on Ebay but good luck if it's no better than the one you have now. 

Title: Re: Rear brake disc
Post by: Garf on November 28, 2016, 07:53:01 PM

Thanks for the Amazon "Heads up"  Order placed, will be here Thursday. :clap: